Hydraulic Augers

The HYDRAWHIZ – 10″, 11″ and bigger – 40ft to 53ft Hydraulic Augers

Australian Made and Built to Last!

These Hydraulic Augers are unlike any other. Fully hot dipped galvanized, ultra strong and with a host of bonus extras included.

The Hydrawhiz is powered by air cooled 3 or 4 cylinder diesel engines that operate at a lower engine RPM and consequently fuel consumption is good. All engines come with an integrated hydraulic oil cooler. While these engines are excess to the augers horsepower requirements we provide them anyway as a standard feature, to lower engine loads and increase engine life.

Check out the features for yourself! (Specifications and Pricing BELOW)

TAKE A TOUR of our HYDRAWHIZ AUGER!!
Pictured is an 11" x 51' Hydrawhiz Auger.
This hot dip galvanised auger is the fully hydraulic version of our SP (Self-Propelled) Whizitup Auger, available in 10", 11" or bigger from 40ft up to 53ft long.
STRAPLESS HOPPER
All Hydrawhiz Augers come complete with a detachable poly hopper that is quick and easy to use, and best of all... No annoying straps!! The cage frame is fitted with a secondary mesh safety guard which is also readily detachable to allow access into a silo boot.
INTERNAL AUGER
5mm Heavy duty Double start Segmented flighting at pickup with 5mm Flihard continuous flighting for remaining length of auger, fully stretched and welded to medium wall pipe shaft. The auger is centered and supported in a cage frame which has a replaceable bronze bush. Seen here with optional galvanised silo boot.
Clamp On Emergency stop button fitted with bumper guard is located near pickup and is able to be rotated to your preferred position for manoeuvring under silos. Seen here with optional galvanised silo boot.
OPTIONAL CAGE CHOKE
For use with poly hopper or seen here with optional galvanised silo boot.
AUGER BARREL
The Auger Casing is Spiral welded high tensile 2.5mm tube, which is Hot Dip Galvanized after all welding is completed. Each Auger comes with a "pickle port" (1" BSP Fitting for Chemical Application), and also has an LED worklight to illuminate the pickup end.
UNDERCARRIAGE
The Hydrawhiz undercarriage is possibly the strongest on the market, a robust design with Arms manufactured from heavy duty RHS or I Beam, and the Axle manufactured from 125x65 channel. All undercarriage pieces are hot dip galvanised after welding has taken place.
Hydraulic Rams raise and lower the tail (pickup end) and main lift (outlet end) of the auger.
JOCKEY WHEEL STEERING
The wheel drive system is heavy duty, and includes Twin 14" Ford jockey wheels that are steered hydraulically.
HYDRAULIC CONTROL PLATFORM
Independant Levers are easy to use for the Hydraulic system. Toolbox, Fire Extinguisher and Manual are all within reach of the operating platform.
EASE OF CONTROL
From start to stop, everything you need to do is controlled from here. Other than for basic maintenance there is no need to go fumbling around the engine... we've got all operations covered at the platform!
COMPACT DESIGN
Our sturdy design sees the engine securely mounted in the center of the auger undercarriage with the Hydraulic Oil Tank (with sight gauge) and Fuel Tank easily accessible at either side.
ENGINE
The standard engines fitted are Deutz design 4 cylinder 59HP (41kW) air cooled diesels. Dual hydraulic pumps provide power for the auger and secondary systems. The auger pump and motor are matched to operate efficiently with the engine running at a relatively low rpm for low fuel consumption. Engines are housed with a galvanised Weather shield.
HYDRAULIC WHEEL DRIVE
Heavy Duty Self Propelled hydraulic wheel drive system, so easy to use!!
Single spring loaded lever engages and disengages both wheels.
The Landcruiser Trailer 16", six stud wheels are Hydraulically driven via heavy duty 12mm ring gear for long life and hassle free maintenance.
Galvanised mud guards are that special touch for additional protection.
OUTLET SHUTE & HYDRAULIC MOTOR
An angled transition assists grain to exit into the 90 degree outlet shute, helping prevent backup.
50x5 Angle iron bump guard protection on the underside of barrel. Hydraulic motor mount and endplate are both removable for easy maintenance.
Auger comes standard with LED work light at outlet end.
TOW HITCH
The Hydrawhiz tow bar utilises the same quick hitch detachable mechanism as the strapless hopper. When not in use it has a handy home on the framework of the undercarriage.
The Tail Lift Hydraulic ram also raises the jockey wheel assembly to safe transport position.
With the jockey wheels raised in transport position a safety chain secures them in place preventing hydraulic creep.
OPTIONAL OUTRIGGERS
Solving the problem of stability in uneven areas or windy conditions these Hydraulic outriggers are standard on the 11” Hydrawhiz and optional on the other sizes.
OPTIONAL OUTRIGGERS
Operating independantly you can use one or both of the hydraulic outriggers to stabilise the auger.
OPTIONAL OUTRIGGERS
These outriggers are unique to our Hydrawhiz Augers and they most certainly are a stable investment!
The Hydrawhiz at full elevation.
End View of the Hydrawhiz with the outriggers extended.
You can't go past the features on the HYDRAWHIZ...
Auger Supplies WA Made, Fully Galvanised Hydraulic Auger.
BUILT TO LAST!

THE SPECIAL FEATURES ON OUR HYDRAWHIZ AUGER MODELS

- - - - Auger Barrel & all Undercarriage Hot Dip GALVANIZED
        
        2.5mm HIGH TENSILE Auger Barrel as standard
        
        5mm Continuous FLIHARD Flighting with Double Start 5mm SEGMENTS at pickup
        
        CAGE FRAME with Replaceable Bronze Bush
        
        Detachable SECONDARY SAFETY GUARD over cage
        
        Removable TOW HITCH with 50mm ball coupling / draw bar
        
        Deutz design 59hp AIR COOLED 4 cylinder DIESEL MOTOR by BENEI, with Hydraulic oil cooler, dry type air filter, digital smart control panel (with oil temp, pressure, tacho, hour meter & more)
        
        50L powder coated steel Hydraulic fluid tank with Rubber mounts
        
        Twin 3″ hydraulic rams for raising/lowering auger
        
        WHEELS are Landcruiser 16″ six stud with new tyres & Galvanized mudguards
        
        Heavy duty SELF-PROPELLED hydraulic wheel drive system
        
        Stand on WORK PLATFORM with hydraulic controls & motor remote start
        
        Dual JOCKEY WHEELS (Ford 14″ rims) with HYDRAULIC STEERING
        
        AXLE in 125×65 Channel
        
        Jockey assembly raises hydraulically for transport
        
        Automatic TAIL LIFT (as lifting arms raise) with 3″ hydraulic ram adjustment
        
        Twin hydraulically operated OUTRIGGERS for added stability when auger fully elevated
        
        Pickle Port
        
        Toolbox and 2.5kg Fire Extinguisher (larger mount available as optional extra)
        
        45L powder coated steel FUEL TANK with rubber mounts
        
        2 x WORKLIGHTS for illumination of auger inlet and outlet.
        
        Strapless Removable plastic HOPPER
        
        Heavy Duty Battery
        
        All necessary SAFETY covers and emergency stop for agricultural use
        
        *Galvanized Steel Strapless Removable Silo Hopper with rubber curtain (*optional extra)
        
        *Inlet cage choke (*optional extra)
        
        *Poly 3 bucket outlet shute with straps (*optional extra)
        
        *Mounting Bracket to suit a 9kg Fire extinguisher -not included (*optional extra)

What size Auger Do I need?

Our 53 foot augers sitting at 46 degrees max elevation angle have a clearance of 11.65m under the outlet shute, with an overhang of 4.3m from wheels to outlet shute.

DOWNLOAD THE ENGINE CONTROL MANUAL for the 495ZD BX50H digital control box HERE

DOWNLOAD THE ENGINE CONTROL MANUAL for the Benei New SmartGen control Box HERE

HYDRAWHIZ PRICING & ENGINE SIZES (current July 2023)

- - - - 10″ x 53′ Hydrawhiz – with a 3 cylinder Diesel Engine – $tba + GST
        
        10″ x 53′ Hydrawhiz – with a 4 cylinder Diesel Engine – $tba + GST
        
        11″ x 53′ Hydrawhiz – with a 4 cylinder Diesel Engine – $53,840 + GST
        
        OPTIONAL EXTRAS (current June 2022)
        
        Galvanized Steel Strapless Removable Silo Hopper with rubber curtain – $385 + GST
        
        Sliding Inlet Cage Choke Galvanized – $110 + GST
        
        Poly 3 bucket outlet shute with straps – $255 + GST
        
        Mounting Bracket to suit a 9kg Fire extinguisher (not included) – $105 + GST

We also supply replacement components for the Hydrawhiz Augers if you are in need of repair and are happy to supply complete top sections (drop on barrel AND INTERNAL AUGER) for anyone wishing to engineer and manufacture their own undercarriage, or retrofit an existing undercarriage.

Need a Smaller Auger? Check out our 9″ and 9 1/2″ Self propelled Range here.